- Additional information
- Reviews (0)
The Netonix® WISP Switch™ model WS-26-500-DC is designed specifically for the WISP industry with a rugged chassis and extended operating temperature range. It features a simple yet powerful user interface providing the software features WISPs need in a switch.
24V PoE Ports,Pins 4,5 (+) Pins 7,8 (-),.75A – Ports 01-24
48V PoE Ports,Pins 4,5 (+) Pins 7,8 (-),.75A – Ports 01-24
24VH PoE Ports,Pins 1,2,4,5 (+) Pins 3,6,7,8 (-), 1.5A – Ports 01-02
48VH PoE Ports,Pins 1,2,4,5 (+) Pins 3,6,7,8 (-), 1.5A – Ports 01-06
Monitor DC voltage and current into the switch from your batteries and DC power supply temperature with auto and programmable thermal shutdown.
Program the switch to shut down lower priority POE ports when batteries get low and to restore them when sufficient reserves return or when it detects charging has resumed from solar or wind. If power gets too low it can be configured to shut down all POE ports and hibernate your remote site until it detects solar or wind charging has resumed and sufficient reserves are generated.
you can choose to run your batteries all the way down to 9V to keep the tower up or have it shut down in stages to preserve your energy. Since we designed the power supply to have its own microprocessor and to communicate to the switch itself we have full control over the power supply and all relative telemetry generated by sensors built into the power supply.
NOTE: We are allowing back orders but be warned lead time on these is approximately 1-4 weeks. Backorders will be filled in a FIFO order based on the date of payment, not the order date.
NOTE: Optional rack mount kit sold separately. Designed to hook directly to the battery bank, not a power supply.
NOTE: Always use an inline fuse or breaker.
If you have a 48V-54V power supply you should use the WS-26-DC unit.
500 Watt SMART DC power supply accepts 9V to 72V DC variable input while providing uninterrupted 24V and 48V POE
– 500 Watt POE budget when input voltage above 19V
– 450 Watt POE budget when input voltage above 16V
– 380 Watt POE budget when input voltage above 14V
– 300 Watt POE budget when input voltage above 11V
– 250 Watt POE budget when input voltage below 11V
WARNING: This switch is not designed to operate on negative 48V site, using -48V DC will damage the switch as it does not have isolated input output power.
|Dimensions||34.3 × 24.8 × 4.4 cm|